Action Bullets

TECHNICAL DATES

Match Grade Hard Cast Bullets. The Action Bullets can be pushed over 1400 fps, without significant leading. The outstanding accuracy on the target is the characteristic to distinguish the product. Normally, high speed and high frequency shooting encourage the phenomenon of the leading of the barrel: a typical example of this are the matches of Practical Shooting. So, not leaving any deposits of lead in the barrel at high speed is one of the characteristics of the Action Bullets. Anyhow, as important as that is the capacity to stabilize as easily as possible within the limits of the used weapon. The more accurate the bullet, the better one can take advantage of the technical quality of the barrel one shoots with, which usually is created for bullets with jacket and therefore with well-pronounced rifling pitches and spaces with little profound rifling. The particular composition of the ternary alloy of Action Bullets (antimonial lead) confers quite particular characteristics of plasticity, avoiding unpleasant "sizing in the barrel" which gives the tumbling effect and the bullets arrive flat and imprecisely on the target. As we know, the factors that influence the accuracy of the bullet on the target are many: profoundness and pitch of the rifling; maximum pressure and temperature of the gas, generated by burning: the surface hardness, elasticity and melting point of the lead alloy; lubricant of the bullets. The formula and the elaboration of the alloy are a compromise between elasticity and surface hardness and, in minor proportion, the melting point: one of the basic elements that give elasticity in a homogeneous way is the virginity of the alloy. Action Bullets makes use of only virgin materials prepared by selected suppliers and products with quality certificates. They hold to have reached the best union between structural elasticity and surface hardness. The typical test that Action Bullets suggests to the user to compare bullets of different origins is the vice compression and the cutting with nippers; a test that unequivocally emphasizes the plasticity of the bullets and the absence of crystallization and internal impurities. And all this has been realized by Action Bullets with the aim of maximum accuracy, in the widest field of possible conditions of speed and pressure. Another element that characterizes Action Bullets is the constancy of the products: the homogeneity of the cartridges is determining for the shooters and therefore it is very important that the bullets always have the same weight, diameter and hardness. Finally the lubricant: Action Bullets makes use of a grease on a synthetic basis, Made in the U.S.A., specific for high speed. Action Bullets selects manually the whole production, after the melting and before the sizing, in order to guarantee the maximum quality of the product. Note: Action Bullets uses the denomination of its own products, weights in nominal grains, referring to the specific die that is produced by specialized workshops in the U.S.A. The real weight of the Action Bullets is ca. 2% / 3% more than the nominal value (according to the die). Action Bullets is also an RB 17 Gun Cleaner, the efficacious quick action lead remover, produced in Texas, exclusively for Action Bullets.

			ACTION BULLETS
TECHNICAL DATES Match Grade Hard Cast Bullets. The Action Bullets can be pushed over 1400 fps, without significant leading. The outstanding accuracy on the target is the characteristic to distinguish the product. Normally, high speed and high frequency shooting encourage the phenomenon of the leading of the barrel: a typical example of this are the matches of Practical Shooting. So, not leaving any deposits of lead in the barrel at high speed is one of the characteristics of the Action Bullets. Anyhow, as important as that is the capacity to stabilize as easily as possible within the limits of the used weapon. The more accurate the bullet, the better one can take advantage of the technical quality of the barrel one shoots with, which usually is created for bullets with jacket and therefore with well-pronounced rifling pitches and spaces with little profound rifling. The particular composition of the ternary alloy of Action Bullets (antimonial lead) confers quite particular characteristics of plasticity, avoiding unpleasant "sizing in the barrel" which gives the tumbling effect and the bullets arrive flat and imprecisely on the target. As we know, the factors that influence the accuracy of the bullet on the target are many: profoundness and pitch of the rifling; maximum pressure and temperature of the gas, generated by burning: the surface hardness, elasticity and melting point of the lead alloy; lubricant of the bullets. The formula and the elaboration of the alloy are a compromise between elasticity and surface hardness and, in minor proportion, the melting point: one of the basic elements that give elasticity in a homogeneous way is the virginity of the alloy. Action Bullets makes use of only virgin materials prepared by selected suppliers and products with quality certificates. They hold to have reached the best union between structural elasticity and surface hardness. The typical test that Action Bullets suggests to the user to compare bullets of different origins is the vice compression and the cutting with nippers; a test that unequivocally emphasizes the plasticity of the bullets and the absence of crystallization and internal impurities. And all this has been realized by Action Bullets with the aim of maximum accuracy, in the widest field of possible conditions of speed and pressure. Another element that characterizes Action Bullets is the constancy of the products: the homogeneity of the cartridges is determining for the shooters and therefore it is very important that the bullets always have the same weight, diameter and hardness. Finally the lubricant: Action Bullets makes use of a grease on a synthetic basis, Made in the U.S.A., specific for high speed. Action Bullets selects manually the whole production, after the melting and before the sizing, in order to guarantee the maximum quality of the product. Note: Action Bullets uses the denomination of its own products, weights in nominal grains, referring to the specific die that is produced by specialized workshops in the U.S.A. The real weight of the Action Bullets is ca. 2% / 3% more than the nominal value (according to the die). Action Bullets is also an RB 17 Gun Cleaner, the efficacious quick action lead remover, produced in Texas, exclusively for Action Bullets.